How do I convert VS Communicator 3.x boards into Tobii Communicator 4.x?

VS Communicator 3.x boards are NOT automatically converted to and ready to use in Tobii Communicator 4.x. To make them accessible, please complete the following steps:

  1. Navigate to: C:\Program Files\Viking Software\Communicator\Dynamic Displays\My Displays
  2. Copy all of the Displays in this location
  3. Close this window
  4. Navigate to: C:\Documents & Settings\Logged in User\My Documents\VS Communicator 4\Guest (or other named user)\My Page Sets
  5. Paste the Displays within this location
  6. Close this window
  7. Open TC4
  8. Open the View Ready-Made Page Sets screen
  9. Click the My Page Sets tab
  10. Click (to open) one of the copied items
  11. If necessary, press F10 to show the pull down menus
  12. From the File pull down menu, select Save (NOT Save As)
  13. A prompt will appear stating that the document was originally created in a previous version of Communicator and if you continue to save it that you will no longer be able to open it in the old version. (It is OK, because we copied the older version in step 2 above.)
  14. Click OK
  15. If desired, rename the file but there is no need to
  16. Click Save
  17. If the file has not been renamed, click Yes when prompted if you wish to replace the file
  18. The file is saved and is now a TC4 Page Set (instead of a VSC 3 Display).

© Copyright 2019 Tobii Dynavox

Terms & ConditionsLegal NoticePrivacy PolicyHIPAA Policy